The Divi Number Counter Module is an easy way to display numerical information about yourself or your company in an eye-catching design.
The Number Counter Module can display both plain numerical numbers and percentages. When the Number Counter Module loads, it starts from zero, counts up to the number or percentage you specified and then stops.
How to Add the Divi Number Counter Module to Your Page
Add a new page or edit an existing page.
By default, the Standard Gutenberg Editor loads whenever a new post or page is added to WordPress.Click the purple button underneath the page title. Use The Divi Builder.
Once clicked, the page will be reloaded with the Divi Visual Builder.
As your page reloads, you'll notice three options:
Build From Scratch
Choose A Premade Layout
Build with AI
Build From Scratch
This option loads the Divi Builder with a blank page design. Choose this option if you'd like to start your page design from Scratch.
Choose a Premade Layout
This option lets you choose from our large library of pre-designed Divi layouts. You can choose from premade layouts by Divi, which you've designed and saved to your Divi Library, and existing pages on your website that you can clone.
Build with AI
This option allows you to create an entire page layout using Divi AI. Using your text prompt and information about your website, you can create the perfect page outline, then build it and fill it with content and imagery, bringing it all to life in no time.
Add the Number Counter Module
Click the green
+icon to insert a Row.Click the gray
+icon inside the Row to open the Divi Module Library, which contains all the modules included with the Divi theme.Find the Number Counter module and click on it to load the module.
The module library is also searchable. Type the module name you want in the search bar at the top.
All Divi Number Counter Module Options Explained
Upon adding the Number Counter module, the module settings will appear automatically. These settings are divided into three tabs: Content, Design, and Advanced.
Content Tab
Inside this tab, you'll find the content options available for the Divi Number Counter module.
Text
Inside this tab, you can edit the title and number of content for the module.
Title - Write the text you want to be displayed underneath the number here.
Number - Write the number that you would like displayed here. Only numerical values are accepted.
Elements
This controls which elements are shown with this module. The Number Counter Module only has one, the percent sign.
Percent Sign - If you want a percent sign displayed after the number, toggle this option to on. Toggle this option off if you want to display a number with no percent sign.
Link
If you would like to apply a clickable link to the entire module, you can do so here.
Module Link URL - Paste the URL of the link you would like to apply to this module here. This makes the entire module clickable, and when clicked, it will direct visitors to the URL pasted here.
Module Link Target - A link target means defining whether you want the link to open in a new tab or the same window when clicked.
In The Same Window - if you want the link to open in the same window
In The New Tab - if you want that link to open in a new tab.
Background
In the Background option group, the following options can be set:
Background Color
Background Gradient
Background Image
Background Video
Background Pattern
Background Mask
How to Add a Background Color
Click the first tab, the Paint Bucket icon.
Click Add Background Color and choose from your site's color palette, or use the eyedropper icon to find a new color.
How to Add a Background Gradient
Click the second tab, the Gradient icon,
Click Add Background Gradient.
To change the gradient colors, click on the gradient stops and select a color from your site's color palette or use the eyedropper icon to choose a new color. Gradient stops allow you to add more colors to the gradient. Click anywhere on the range slider to add a new stop.
Background Gradient options
Gradient Type - You can change the gradient type by clicking the dropdown menu and selecting the desired one.
Gradient Direction - You can change the direction of the gradient by dragging the range slider or typing in a numerical value.
Repeat Gradient - Toggle this option to yes if you want the gradient to repeat.
Gradient Unit - The gradient unit changes how the gradient stop points are calculated. Select the dropdown to change the unit.
Place Gradient Above Background Image - If a background image is applied, you can place the gradient above the background image by toggling this option to yes.
How to Add a Background Image
Click the third tab, the Image icon.
Click the gray
+icon to bring up the Media Library, where you can select an already uploaded photo from your library or upload a new one.
Background Image options
Use Parallax Effect - To apply a parallax effect to the image (where the image scrolls faster than the foreground content, giving the illusion of a 3D effect), then toggle this option to on. By default, this setting is set to off.
Background Image Size - Choose the size of your background image by selecting a size from the dropdown menu.
Background Image Position - Choose the position of the background image by selecting a position from the dropdown menu.
Background Image Repeat - Choose if and how the background image repeats by selecting an option from the dropdown menu.
Background Image Blend - Choose how the background blends with other layers in the module by selecting an option from the dropdown menu.
How To Add a Background Video
Click the fourth tab, the Video icon.
Click the gray
+icon to bring up the media library, where you can select an already uploaded photo from your library or upload a new one.
Background Video options
Mp4 vs WebM. - We recommend uploading both a
mp4version and awebmversion of the video because not all browsers support WebM video formats. Uploading both file types ensures your video will play on all devices and browsers.Background Video Width - Set the video's width by typing in a numerical value.
Background Video Height - Se the height of the video by typing in a numerical value.
Pause Video When Another Video Plays - If you'd like the background video to pause when another video is playing, toggle that option to yes. By default, the video will pause when not in view. If you want the video to continue, toggle this option to no.
How to Add a Background Pattern
Click the 5th tab, the Pattern icon
Click Add Background Pattern
Choose the pattern type you want from the dropdown
Background Pattern options
Pattern Color - Select the pattern color from your site's color palette or use the eyedropper icon to find a new color.
Pattern Transform - Transform the pattern horizontally or vertically, rotate it, or invert it.
Pattern Size - Pattern size is where you can select the pattern size: the actual size, cover, fit, stretch to fill or custom size. If you select custom size, the following options will appear: pattern width and pattern height. Drag the range slider or type in a numerical value to define those options.
Pattern Repeat Origin - Select the origin from which the pattern repeats.
Pattern Horizontal and Vertical Offset - Adjust the horizontal and vertical offsets for the pattern.
Pattern Repeat - Choose how the pattern repeats – horizontally, vertically, and more.
Pattern Blend Mode - Defines how the pattern layer interacts with the layers beneath it. Select from one of the 16 blend modes available from the dropdown.
How to Add a Background Mask
Click the 6th tab, the Mask icon
Click Add Background Mask
Select the mask type you want via the dropdown menu
Background Mask options
Mask Color - Choose the mask color from your site's color palette, or use the eyedropper icon to find a new color.
Mask Transform - Transform the mask horizontally or vertically, rotate it, or invert it.
Mask Aspect Ration - Set the aspect ratio of the mask. The aspect ratio of an image is the ratio of its width to its height.
Mask Size - Select the mask size: the actual size, cover, fit, stretch to fill or custom size. If you select custom size, the following options will appear: mask width and height. Drag the range slider or type in a numerical value to define those options.
Mask Blend Mode - Defines how the mask layer interacts with the layers beneath it. Select from one of the 16 blend modes available from the dropdown.
Admin Label
The Admin Label is where you can give the module a name only visible to you to assist in keeping things organized and easy to understand on the back end. By default, the admin label will be the name of the module. You can change the text of the admin label to reflect what you'd like.
Design Tab
Inside this tab, you'll find all the design styles and configurations for the Divi Number Counter Module.
Text
This sets the overall text styles for this module; however, you can define more specific styles for specific elements in other tables like Title Text and Number Text.
Text Alignment - Choose how the text aligns:
Left
Center
Right
Justify.
Text Color - Select this module's default text color palette: light or dark. The default light color palette and dark color palettes can be configured in the Divi Theme Options.
Text Shadow - Apply a drop shadow to all the text inside this module. When a shadow type is selected, it will apply to all the content, both the number and the title text.
Title Text
These are the specific styling and configuration settings for the Title Text only.
Text Heading Level - Choose the heading level assigned to the title text: h1, h2, h3, h4, h5, or h6.
Title Font - Choose the font you want to use for the title text. The default font is automatically selected; however, you can choose a different font or upload a custom font by clicking the dropdown box.
Title Font Weight - Click the dropdown to select the boldness of the title text font.
Title Font Style - Choose the style of the title text font:
Italicized
Capitalized
Small Capitals
Underlined
Strike-through
Title Text Alignment - Choose the text alignment specifically to the title text only:
Left
Center
Right
Justify
Title Text Color - Choose a specific color for the title text. Select from your site's color palette or click the eyedropper icon to find a new color.
Title Text Size - Choose the font size of the title text by dragging the range slider or typing in a numerical value.
Title Letter Spacing - Choose the letter spacing of the title text by dragging the range slider or by typing in a numerical value. Letter spacing is the space between each letter. The higher the number, the more space.
Title Line Height - Choose the line height of the title text by dragging the range slider or by typing in a numerical value. The line height is the amount of space between each line of text. The higher the number, the more space.
Title Text Shadow - You can add a drop shadow to the title text. Once a style is selected, you can configure the direction of the shadow (horizontal and vertical), the strength of the drop shadow blur, and the shadow color.
Number Text
These are the settings for specific styling and configuration for the Number Text only.
Number Font - Choose the font you want to use for the number. The default font is automatically selected. However, you can choose a different font or upload a custom font by clicking the dropdown box.
Number Font Weight - Click the dropdown to select the boldness of the number font.
Number Font Style - Choose the number font style:
Italicized
Capitalized
Small Capitals
Underlined
Strike-through
Number Text Alignment - Choose the number text alignment:
Left
Center
Right
Justify
Number Text Color - Choose a specific color for the number font. Select from your site's color palette or click the eyedropper icon to find a new color.
Number Text Size - Choose the font size for the number font by dragging the range slider or typing in a numerical value.
Number Letter Spacing - Choose the letter spacing of the number font by dragging the range slider or typing in a numerical value. Letter spacing is the space between each letter. The higher the number, the more space.
Number Line Height - Choose the line height of the number text by dragging the range slider or by typing in a numerical value. The line height is the amount of space between each line of text. The higher the number, the more space.
Number Text Shadow - You can add a drop shadow to the number here. Once a style is selected, you can configure the direction of the shadow (horizontal and vertical lengths), the strength of the drop shadow blur, and the shadow color.
Sizing
Width - Defines the
widthof the module. For more information, please check out the official documentation.Max Width - Defines the
max-widtof the module. For more information, please check out the official documentation.Module Alignment - If a
Widthor aMax Widthvalue is set, the module alignment can be set using the three options:Left Aligned
Center Aligned
Right Aligned
Min Height - Defines the minimum value for the module's height. For more information, please check out the official documentation.
Height - Define the
heightof the module. For more information, please check out the official documentation.Max Height - Defines the
max-heightvalue the module can have. For more information, please check out the official documentation.
Spacing
You can add margins or spacing to this module by typing numerical values.
Margin adds space outside the module, and padding adds space inside the module. To lock in ratios and keep the values the same, click the chainlink icon between the values you want to always be identical (ex, top and bottom).
Default
marginvalues for the module are0.Default
paddingvalues for the module are0.
Border
Add a border to the module. You can add a complete border or a border to only one side of the module. Adjust the width via the range slider and select a color. Choose a border style by clicking the dropdown.
Rounded Corners - Type in a numerical value for round border corners. The higher the number, the rounder the corners will be. The corner values are automatically linked (as seen by the highlighted blue chainlink in the middle); however, if you'd like to have different values for each corner, click the blue chainlink to unlink the values. If the values are automatically linked, they will always have the same value and update automatically if one value is changed.
Border Styles - Add a border to all sides of the module or individual sides (top, right, bottom, and left).
Border Width - This is where you set the width of the border. For a thicker border, increase the number. The border width must be at least 1px to show.
Border Color - This is where you can pick the border's color. You can select a color from your default site color palette that is already displayed or click on the eyedropper icon to find a new color.
Border Style - Here, you can select what border style you'd like: solid, dashed, dotted, double, groove, ridge, inset, outset, or none.
Box Shadow
Add a drop shadow to the entire module. Once a shadow style is clicked, you can customize the following options:
Box Shadow Horizontal Position - Defines the horizontal position of the drop shadow.
Box Shadow Vertical Position - Defines the vertical position of the drop shadow.
Box Shadow Blur Strength - Defines the strength of the shadow's blur. The higher the value, the bigger the blur and the wider and lighter the shadow becomes.
Box Shadow Spread Strength - Defines the spread strength of the blur. Increasing the spread strength will increase the density of the box shadow. Higher density results in a more intense shadow.
Shadow Color - Defines the shadow's color.
Box Shadow Position - Defines the shadow's position. It can be inside the module or outside the module.
Filters
Adjust the module's filters:
Hue - Defines the hue angle of a color.
Saturation- Defines how intense the color saturation should be.
Brightness - Defines how bright the colors should be.
Contrast - Defines how distinct bright and dark areas should be.
Invert - Invert the hue, saturation, and brightness by the specified value.
Sepia - Defines a warmer, more yellow/brown appearance.
Opacity - Defines how transparent or opaque the background (color, gradient, image, etc.) should be.
Blur - Defines the amount of Gaussian Blur applied to the module.
The Blend Mode refers to how the module blends with the layers beneath it. By default, normal will be selected.
Transform
Scale
Translate
Rotate
Skew
Origin points
Tab through to access each option. Configure each option by inputting numerical values or dragging and expanding the box or circle.
You can lock in these values to always be identical by clicking the chain link icon at the bottom right.
Animation
Here, you can apply animation to the module. Once you choose a style, you can adjust the following options:
Animation Duration - Defines the length of time that an animation takes to complete one cycle.
Animation Delay - Define the amount of time to wait from applying the animation to an element before beginning to perform the animation. The animation can start later, immediately from its beginning, or immediately and partway through the animation.
Animation Starting Opacity - Define the starting opacity value.
Animation Speed Curve - Define the easing method of your animation. Easing your animation in and out will create a smoother effect than a linear speed curve.
Animation Repeat - By default, animations will only play once. If you want to loop your animation continuously, choose the Loop option here.
Advanced Tab
Within the Advanced tab, you will find options that more experienced web designers might find useful, such as custom CSS.
Here, you can apply custom CSS to your module. You can also apply custom CSS classes and IDs to the module, which can be used to customize the module's styles with more advanced CSS properties or to apply custom CSS code using the module's CSS class.
CSS ID & Classes
Assign a specific CSS ID or Class to this module. This is helpful when applying custom CSS to a module by using your child theme's stylesheet.
Custom CSS
Free-Form CSS - Write free-form CSS using the keyword
selectorto target this module. Example:selector h1 {color: red;}Module Elements - You can also apply custom CSS to this module by pasting it in this tab. When you click on the Module Elements tab, you'll see individual sections where you can add custom CSS properties.
Conditions
This tab allows you to choose when to display this module based on a set of conditions, like when a user is visiting the page if they've already purchased from your company before, what browser they are using, what operating system they're using, and more.
You can add one condition or multiple conditions.
Visibility
Disable on - Defines the visibility of the module. You can disable it (hide it from view) when the display window is a Phone, Tablet, or Desktop by clicking the corresponding checkbox.
Horizontal Overflow - Defines what shows when content overflows a block-level element's left and right edges. This may be:
Visible - The content will show if the module's content overflows its height.
Scroll - If the module's content overflows its height, a vertical scroll bar will be used to scroll through its content.
Hidden - If the module's content overflows its height, the part of the content that overflows will be hidden.
Auto - The browser will decide whether a scroll bar will be shown.
Vertical Overflow - Defines what shows when content overflows a block-level element's top and bottom edges. This may be:
Visible - The content will show if the module's content overflows its height.
Scroll - If the module's content overflows its height, a vertical scroll bar will be used to scroll through its content.
Hidden - If the module's content overflows its height, the part of the content that overflows will be hidden.
Auto - The browser will decide whether a scroll bar will be shown.
Transitions
This controls the hover animation's transition duration, delay, and speed curve.
Transition Duration - Defines the duration (in milliseconds) of the transition of the hover animation.
Transition Delay - Defines the transition delay of the hover animation (in milliseconds).
Transition Speed Curve - Defines the transition speed curve of the hover animation.
Position
Position - This defines the position of the module:
Relative (default value) - The module is positioned according to the normal flow of the document, and then offset values are relative to itself based on the values of
Vertical OffsetandHorizontal Offset. The offset does not affect the position of any other elements; thus, the space given for the module in the page layout is the same as if the position were default (static).Absolute - The module is removed from the normal document flow, and no space is created for the element in the page layout. The module is positioned relative to its closest positioned ancestor (if any) or the initial containing block. The Location options determine its final position
Fixed - The element is removed from the normal document flow, and no space is created for the element in the page layout. The module is positioned based on the location options in relation to the browser window. This can be used to create a
stickymodule.
Vertical Offset - Defines the module's vertical position.
Horizontal Offset - Defines the module's horizontal position.
Z-index - Defines the order of the module in the page layout. Modules with a higher
z-indexnumber overlap modules with a lowerz-index.
Scroll Effects
This section defines the module's behavior when the user scrolls the page. You can make the module sticky to the top, bottom, or both and decide if the module should transform as the user scrolls.
Additionally, you can enable vertical motion on this module, which allows you to adjust the scrolling speed of the element without affecting the surrounding elements.
The Motion Trigger Effect feature lets you choose when the scroll effect you just applied is triggered. You can trigger the effect when the element's top, middle, or bottom is in view.
Save Your Design
Once you are finished styling and configuring the number counter module, click the green arrow at the bottom right of the module to save your design. If you close the module without saving, your work will be lost.
Next, Save the Page Design
To save the page design, you can type CMD + S on a Mac or CTRL + S on a PC. You can also use the bottom Divi toolbar to save your page design by clicking the circle purple icon with the three dots … to expand the toolbar and then clicking the green Save button at the bottom right.
Exit the Visual Builder
Now that all your changes are saved, click Exit Visual Builder on the admin toolbar at the top to exit the Visual Builder.
